Installing a new kitchen sink. The drain opening and garbage disposal drain collar don't match.? - kitchenaid disposal
Believe the opening in the sink drain 5 times, but the neck of the garbage disposal is 4-1/2 ". Tilted through the open sewers, not I, fell, plug the leak, whether cement of the installer. Are adapters available as an accessory? This is a waste KitchenAid and Kohler sink.
Saturday, January 9, 2010
Kitchenaid Disposal Installing A New Kitchen Sink. The Drain Opening And Garbage Disposal Drain Collar Don't Match.?
Subscribe to:
Post Comments (Atom)
5 comments:
If you do not find a good solution to go back where you bought your sink and ask questions. A standard clause should be able to fit. Open with a pressure below its slopes can be interesting.
You should switch to the right people at the opening of the sink drain and human waste disposal (as well as filter cart people) are among the few that is a standard size.
No adapters are available. If you do not feel comfortable with putty (it), then you can be 100% silicon as a clear alternative.
You should switch to the right people at the opening of the sink drain and human waste disposal (as well as filter cart people) are among the few that is a standard size.
No adapters are available. If you do not feel comfortable with putty (it), then you can be 100% silicon as a clear alternative.
Kohler is a stripper bride, but I'm not sure whether it is compatible with the KitchenAid. The model number K-11352 and can be found on their website, or you can probably get them when they fall.
There must be some kind of adapter. I call KitchenAid to ask, but it is possible that you will receive a new provision may also have.
Post a Comment